We restore transparency and shine to your yellow or foggy headlights, improving your night vision and making your car look better at a minimal cost. We come to you anywhere in Kuwait.
A professional step-by-step process to restore full clarity and protect your headlights
We begin with a thorough inspection of each headlight lens to assess the degree of oxidation, yellowing, and fogging. This determines the correct sanding grits and techniques needed to restore full clarity without damaging the lens.
We use wet sandpaper progressing from coarse (400 grit) to fine (2000 grit) to systematically remove the oxidized outer layer of the polycarbonate lens, eliminating yellowing and surface scratches while smoothing the lens for polishing.
After sanding, a specialized plastic polishing compound is applied using a machine polisher to remove sanding marks and restore the lens to maximum optical clarity and gloss, making it look like new.
The final step applies a UV sealant to the restored lens to protect it from Kuwait's intense sun and prevent re-oxidation. This coating extends the clarity of your headlights for 1 to 2 years.
A precise process to restore your headlights to like-new condition
We thoroughly clean the headlight lenses and surrounding area to remove all dust, dirt, and grease, ensuring a clean surface to work on.
We apply masking tape around the headlight perimeter to protect the surrounding paint and trim from accidental contact during the sanding and polishing process.
Using water and progressively finer sandpaper grits from 400 up to 2000, we remove the oxidized layer and all surface defects from the lens, working systematically until the surface is uniformly smooth.
A plastic polishing compound is applied with a machine polisher and foam pad to eliminate sanding marks and restore full optical clarity and gloss to the lens surface.
We apply a UV-protective sealant coat to the restored headlight to shield it from sun damage and oxidation, preserving the clarity and extending the results for 1 to 2 years.
Choose the package that suits you
Headlight lenses are made of polycarbonate plastic that oxidizes over time due to UV exposure and heat, especially in Kuwait's intense sun. This causes the outer layer to become yellow, cloudy, or foggy, reducing light output and night visibility.
Headlight restoration typically takes between 45 minutes and 1.5 hours depending on the condition of the lenses and the degree of oxidation.
Yes, night vision can improve by up to 80% after professional headlight restoration. Clear lenses allow maximum light to pass through, significantly improving road illumination and driving safety.
Results typically last 1 to 2 years when a UV sealant coating is applied after restoration. The UV sealant protects the polycarbonate from re-oxidizing due to sun exposure.
In most cases, restoration is far more cost-effective than replacement. Headlight replacement can cost several times more, while restoration achieves comparable clarity at a fraction of the price — making it the smart choice for most vehicles.
Book your headlight restoration service and restore full clarity and safety to your car's lights. Master Wash comes to you anywhere in Kuwait.
Contact Us 97653721